Beta85X Whoop Quadcopter Standart Version

Description

DO NOT FLY WITH 4S BATTERY. Only support 2-3S battery nowadays.

Beta85X HD Crusing the Wonderland by Benoit

Même si vous ne pouvez piloter que 3S sur Beta85X, vous pouvez toujours vous amuser et vous amuser à fond dans ce film ciné.

Beta85X 3S HD Freestyle Flight de BGUFF (Remarque: la vidéo est agrandie à 4K. La caméra Caddx Turtle V2 utilisée sur le Beta85X prend en charge 1080p)

Le Cinewhoop by SEKILE FPV

“CineWhoop” (Beta85x / DJI Mavic Pro) by Larsco FPV

BULLET POINT

• Beta85X pousse la nouvelle ère des drones sans balai à un niveau supérieur. Avec le nouveau système d’alimentation, vous pouvez voler en mode réel même avec une caméra HD DVR en compétition ou en style libre.
• Avec les cartes FC hautes performances du processeur STM32F405 et le micrologiciel optimisé Betaflight Ominibus 3.5.0. C’est également le premier drone BNF 2 ‘livré avec BLHeli-32 ESC.
• Le cadre durable et suffisamment léger est personnalisé pour le Beta85X. Excepté le cadre traditionnel en fibre de carbone, un autre choix de cadre en plastique pour votre drone 2 ‘.
• Drone entier sans soudure ni bricolage nécessaire. Moteurs 1105 6000KV les plus légers sur mesure avec connecteurs de câbles. Il suffit de brancher et de jouer. Le prop EMAX Avan 2 ‘est le meilleur combo de ce drone Beta85X.
• La batterie haute cadence 450mAh 3S est recommandée par défaut. Mais le pilote peut également utiliser ses propres batteries avec une sangle de batterie. Facultatif et abordable.

SPECIFICATION

• Weight: 58g (without battery)
• Motors: 1105 6000KV with connector
• Props: EMAX Avan 2″ 4-Blades Props
• FPV Camera: Customized EOS2 Camera ( for FPV version)
• HD DVR Camera: CADDX Turtle V2 ( for HD DVR version)
• HD DVR Canopy: Canopy for Beta85X (HD DVR)
• Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
• Frame: Beta85X Frame
• 5.8G VTX antenna: Customized Lumenier AXII antenna
• Battery strap fits for micro 2S-3S battery
• Flight time: 3 minutes with 450mAh 3S battery (smooth flight in a windless environment)

FC SPECIFICATIONS

• CPU: STM32F405
• Six-Axis: MPU6000
• Size: 26mm x 26mm, whoop mounting pattern
• Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
• Smart Audio port is available for radio control VTX

ESC SPECIFICATIONS

• MCU:STM32F051
• Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
• Input voltage: 2S-3S lipo
• Cotinue current: 16A
• Peak current: 25A
• BLHELI_32 Firmware target: BETAFPV-16A-32bit

FPV Camera and VTX

• Output power: 0mW, 25mW and 200mW (Adjustable)
• Smart Audio function is included for radio control
• Antenna: Customized Lumenier AXII antenna
• Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
• Customized EOS2 FPV camera / (HD Version) CADDX Turtle V2 HD camera.
• TV System: NTSC
• Field of view: 100-120 degrees with 1/3 lens

HD DVR VERSION

The primary purpose of the Beta85X drone is for a cinematic whoop drone. Many polits revamp their Beta75X to HD whoop drone–They add a HD DVR camera on Beta75X drone to get high defination and beautiful flying footage and video. Inspired by this, we want to provide a BNF whoop drone with HD DVR camera by default so that pilot do not need to assemble it by hand and also get more power on punch for acro mode.

Now the Beta85X HD version is here !!!

Inspirations by YKS’ footage with Beta75X.

Know more about cine whoop from NURK FPV’s blog.

In the Beta85X design, the part of HD DVR is independent of the drone. You could mount or remove the HD DVR part very easy. In default, the drone comes with CADDX Turtle V2 HD camera.

The canopy for HD DVR camera is 3d printing with SLA, which is compatible with Runcam Split Mini 2.

Download the STL File for the HD camera mount.

BLHELI_32 ESC

This ESC used to design for 4S battery. But under more extreme testing, it could only stand 2-3S voltage input. DO NOT FLY WITH 4S BATTERY.

BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC‘s that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!

Beta85X is the first 2″ BNF drone that supports BLHeli_32 ESC. With the other power system parts, EMAX Avan 2″ propellers and 1105 6000KV motors, it gives you the highest performance in flying experience.

Know more about BLHeli_32 ESC from Oscarliang’s blog.

AXII ANTENNA

We lost a bunch of prototype drones because of this AXII antenna. Why? The 5.8g VTX signal is still perfect when the RC radio transmitter connection break. This is why we choose this micro antenna for the Beta85X.

Micro AXII 5.8GHz Antenna is the next evolution of the world’s most popular FPV antenna, desinged by TrueRC and manufacted by Lumenier.

Know more about Micro AXII 5.8G antennas.

PROPS OUT

The Beta85X drone also comes with “props out” by default. Why we need “props out” direction?

Default Betaflight props direction, quadcopter dips and “washes out” in hard corners. With reversed props or “props out”, no more dipping even in hardest cornering.

Know more about “Props Out”.

CUSTOMIZED EOS2

Which camera is most popular on brushless whoop drones? That must be CADDX EOS2. Ligher, smaller but still have perfect image performance. Now it is the stock camera for Beta85X drone.  At the same time, the 5.8g VTX board has all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

The EOS2 camera comes with the FPV version of Beta85X drone. The camera tilt angle is switchable from 25 degree to 45. So that it could support different flying situations (indoors and outdoors alike).

Pour changer la fréquence ou la puissance de sortie via la télécommande, veuillez consulter le manuel Smart Audio.

Téléchargez le fichier STL pour le support de caméra EOS2 personnalisé.

PACKAGE

• 1 * Beta85X BNF 2S Whoop Quadcopter
• 1 * OSD cord (only for HD version)

Il n’y a pas de piles incluses pour toutes les versions. Vous devriez acheter des piles 2-3S (XT30) séparées.