Description
Avec le moteur TBS Mr.Steele, une tendance à la fabrication du moteur est enfin interrompue. Vous n’avez plus à sacrifier les piles pour faire un peu plus de puissance que votre installation. Nous avons également cessé d’utiliser des aimants haut de gamme ou de chasser les rêves de pipe de poids requis pour sacrifier la fiabilité et la douceur en vol. Nous avons fait un moteur pour faire correspondre le style volant et les exigences de l’un des pilotes les plus populaires de FPV miniquad, et l’hôte RotorRiot, Mr Steele! C’est un moteur construit pour la longévité, la consistance et la sensation soyeuse et lisse.
A BIT OF HISTORY …
We started out with a couple of corner-stones in motor properties. High kV, low kV. Big stator, small stator. Varying stator laminations, winding techniques and copper diameters. We analyzed the results on a thrust test stand next to all reputable motors, and matched them to the requirements of Mr.Steele’s reference motors. We found the closest match to his requirements, and produced 2 different styles to send for Mr.Steele for testing. After running each of them for a few days, we received feedback, made corrections on the motor, and re-made samples. After a total of 5 iterations and over 100 motors sent, we finally managed to isolate the perfect candidate. But the quest was not done! Next we worked on the finish. To produce a white motor, all tolerances were re-calculated. Each and every detail of the motor, down to the C-clip, was investigated, refined and tested. After almost 4 months of ups and downs, today we are able to release and stand behind what we believe is a motor that will cause a paradigm shift for this industry.
TECHNICAL SPECIFICATIONS:
- Stator size: 2306
- kV rating: 2345kV
- Weight: 28.5g
- Rating: 1S – 4S
- Color: white
- Windings: by hand
- Awesomness factor: over 9000
- Stator lamination: None of your business
INCLUDES
- 1x TBS Mr Steele 2345kv motor
- 4x Mounting screws M3x6.5
- 1x Aluminum Low-Profile Prop nut